Welcome to Dongguan Jinghui Intelligent Equipment Co., Ltd.!
National service hotline

13662805151

Service support
National service hotline

13662805151

Service support /

What are the reasons for the poor accuracy of the labeling machine?

We need to understand clearly what is the cause of the poor precision of the equipment in the process of the labeling machine, so that the labeling machine is easy to solve when there is a problem, then the Seagate labeling machine is so accurate. The reasons for the deterioration are divided into three categories: product problems, equipment problems, and electrical problems.


First, the product problem: should understand what is the product problem, Seagate labeling machine divided it into two, to distinguish between the label problem and the device itself.


(1) The problem of the product is common to the labeling machine, which can make the precision error of the product too large. The method: Check and adjust the dimensional accuracy of the product at the beginning of the equipment, so that the label is attached to the fixed position of the product when the label is attached. Without offset.


(2) The problem with the label is that the label spacing is not too large or too small. The method: check with the label manufacturer to eliminate the label problem.


Second, the equipment reasons: mechanical reasons mainly include two major situations, one is static, and the other is dynamic.


(1) The static cause is the shaking of the header. The solution is to fix the header by tightening the header and adjusting the fixed seat to avoid shaking.


(2) The specific reasons for the dynamic aspect: a) The product is shaken on the conveying, and the solution is to avoid the product from shaking on the conveying by reducing the guiding gap;


(3) Bid and product speed matching, solution: By adjusting the traction frequency or conveying speed, the product will be out of the standard when it reaches the labeling position.


Third, the electrical reasons: the same, electrical reasons can also be divided into two types, namely detection and power, of which:


(1) The common cause of power is the abnormality of the transmission. Solution: Ensure the normal operation of the labeling machine by checking the fastening components.


(2) The specific reasons for the detection are: a) the stopwatch is not allowed, the solution: reset the measurement eye, so that the labeling machine stops the bidding after the product is labeled;


(3) Inaccurate measurement, solution: adjust the measuring object and amplifier, can accurately detect the labeling products, and accurately bid.


Hits:  UpdateTime:2019-03-04 14:24:27  【Printing】  【Close